Telwin welding Machines
Showing 1–20 of 21 results
-
ELECTROMIG 300 SYNERGIC
Quick ViewFeatures:
– Manual or synergic operating;
– 30 pre-set synergic curves;
– MIG-MAG adjustments: wire up slope, electronic reactance, wire burn-back time, post gas;
– 2/4 time operation selection, spot, inch and mm material thicknesses;
– Protections: thermostatic, overvoltage, undervoltage, overcurrent, engine driven generator (+/-15%);
– TIG Lift
Complete with MIG-MAG torch, cable and earth clamp -
EURARC 322
Quick ViewOVERVIEW:
CODE 817014
MMA STICK ELECTRODE WELDING MACHINE IN ALTERNATING CURRENT (AC).
STEPLESS REGULATION OF WELDING CURRENT.
WITH THERMOSTATIC PROTECTION.
THE MODEL HAS DOUBLE SECONDARY VOLTAGE FOR USE ALSO WITH BASIC AND RUTILE ELECTRODES. -
EURARC 410
Quick ViewOVERVIEW:
CODE 817016
MMA STICK ELECTRODE WELDING MACHINE IN ALTERNATING CURRENT (AC).
STEPLESS REGULATION OF WELDING CURRENT.
WITH THERMOSTATIC PROTECTION.
ELECTRODES: RUTILE. -
EURARC 522
Quick ViewOverview:
code 817018
MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
The model has double secondary voltage for use also with basic and rutile electrodes.
-
FORCE 195
Quick ViewFeatures:
– Reduced weight and dimensions
– High welding current stability in spite of mains voltage fluctuations
– Arc force, hot start and anti-stick devices
– Thermostatic, overvoltage, undervoltage, overcurrent, motorgenerator (± 15%) protections.
Complete with MMA welding accessories and plastic carry case.
-
LINEAR 430HD
Quick ViewOverview:
code 819090
MMA, rectified, electrode welding machine in direct current (DC).
Stepless regulation of welding current.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron and aluminium. -
MASTERMIG 300
Quick ViewFEATURES:
– VERY STRONG
– NUMEROUS STEPS FOR REGULATION OF ARC VOLTAGE
– REGULATION OF SPOT WELDING TIME
– TWO POSITIONS FOR REACTANCE
– THERMOSTATIC PROTECTION
THANKS TO THE EXTENSIONS (OPTIONAL) IT IS POSSIBLE TO INCREASE THE WORKING RANGE BETWEEN WIRE FEEDER AND POWER SOURCE UP TO 10 METERS.
COMPLETE WITH MIG-MAG WELDING ACCESSORIES. -
MASTERMIG 400
Quick ViewFeatures:
– Very strong
– Numerous steps for regulation of arc voltage
– Regulation of spot welding time
– Two positions for reactance
– Thermostatic protection
Thanks to the extensions (optional) it is possible to increase the working range between wire feeder and power source up to 10 meters.
Complete with MIG-MAG welding accessories.
-
MASTERMIG 500
Quick ViewFEATURES:
– VERY STRONG
– NUMEROUS STEPS FOR REGULATION OF ARC VOLTAGE
– REGULATION OF SPOT WELDING TIME
– TWO POSITIONS FOR REACTANCE
– THERMOSTATIC PROTECTION
THANKS TO THE EXTENSIONS (OPTIONAL) IT IS POSSIBLE TO INCREASE THE WORKING RANGE BETWEEN WIRE FEEDER AND POWER SOURCE UP TO 10 METERS.
COMPLETE WITH MIG-MAG WELDING ACCESSORIES. -
MAXIMA 190 SYNERGIC
Quick ViewFeatures :
– Polarity reversal for GAS MIG-MAG/BRAZING welding
– Thermostatic, overvoltage, under voltage, motorgenerator (+/- 15%) protections.
Fit for NO GAS/Flux welding, it can be transformed into MIG-MAG with the optional kit.
Complete with MIG-MAG torch, work clamp and cable. -
NORDIKA 3250
Quick ViewOverview:
code 812012
MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories.
-
PTE 18 LCD
Quick ViewFeatures:
– adjustment of spot welding current (%), time (cycles), force of electrodes compression
– choice of various parameters of the spot welding cycle (approach, slope, welding and pause time and pulse number)
– easy to read LCD display
– mechanical pedal control
– thermal protection with indicator
The model requires water cooling for electrodes and arms.
-
SUPERIOR PLASMA 100
Quick ViewFeatures:
– easy to carry;
– high cutting current stability;
– user-friendly easy to read and adjust digital panel;
– remote control;
– thermostatic, overvoltage, undervoltage, overcurrent, torch short circuit, phase and air failure protections.
Complete with torch. -
SUPERIOR PLASMA 160
Quick ViewFeatures:
– easy to carry;
– high cutting current stability;
– user-friendly easy to read and adjust digital panel;
– remote control;
– thermostatic, overvoltage, undervoltage, overcurrent, torch short circuit, phase and air failure protections.
Complete with torch.
-
SUPERIOR TIG 311 DC
Quick ViewFeatures:
– pulse and EASY pulse operation
– TIG regulations: “bi-level”, start up/end current, spot welding time, pre/post gas, current up/down slope, balance DC, square wave frequency
– THINSPOT function for quick and precise tack welding – MMA regulations: arc force and hot start
– anti-stick device
– VRD device
– remote control and G.R.A. water cooling connector
– thermostatic, overvoltage, undervoltage, overcurrent, water cooling unit protections.
Complete with TIG welding accessories. -
SUPERIOR TIG 322 AC/DC AQUA
Quick ViewFeatures :
– pulse and EASY pulse operation
– 9 customized welding programmes
– TIG regulations: bi-level, start up/end current, spot welding time, pre/post gas, current up/down slope, balance DC/AC, square wave frequency
– MMA regulations: arc force and hot start according to the type of electrode in use
– anti-stick device
– remote control and G.R.A. water cooling connector
– storage on on-board E2PROM of the last 10 alarms
– thermostatic, overvoltage, under voltage, inside dirtiness, overcurrent, phase failure, water cooling unit protections.
Complete with TIG welding accessories, trolley and G.R.A. water cooling unit. -
SUPERIOR TIG 421 DC-HF/LIFT + ACC
Quick ViewFeatures:
– pulse and EASY pulse operation,
– 9 customized welding programs,
– TIG regulations: bi-level, start up/end current, spot welding time, pre/post gas, current up/down slope, balance DC, square wave frequency,
– MMA regulations: arc force and hot start according to the type of electrode in use,
– anti-stick device,
– remote control and G.R.A. water cooling connector,
– storage on on-board E2PROM of the last 10 alarms,
– thermostatic, overvoltage, undervoltage, inside dirtiness, overcurrent, phase failure, water cooling unit protections.
Complete with TIG welding accessories. -
TECHNOMIG 215 DUAL SYNERGIC
Quick ViewFeatures:
– polarity reversal for NO GAS/Flux, MIG-MAG/BRAZING welding;
– 25 synergy curves available;
– visualization on LCD display of voltage, current, welding speed;
– regulation of: wire speed up slope, electronic reactance, burn-back time, post gas;
– choice of 2/4 times, spot operation;
– VRD device;
– thermostatic, overvoltage, undervoltage, overcurrent, motorgenerator (+/- 15%) protections.
Fit for MIG-MAGwelding, it can be transformed into NO GAS
/Flux with the optional kit.
Complete with MIG-MAG torch, work clamp and cable. -
TECNICA 211/S
Quick ViewFeatures :
– compact and light
– high welding current stability in spite of mains voltage fluctuations
– arc force, hot start and anti-stick devices
– thermostatic, overvoltage, undervoltage, overcurrent, motorgenerator (+/- 15%) protections.Complete with MMA welding accessories and plastic carry case.
-
Telwin Linear 340 230-400v Welding Machine 801095-l.340 Welding Kit
Quick View- Model Number: TELWIN-25
- Type: Welder
- Color: Multi Color
- Frequency: 50Hz
- Dimensions: 84x49x59 mm
- Weight: 80 Kg
- 230/400V 50/60 Hz, 3 phase Mains voltage
- 60 – 320 A DC Current range
- 320A 25% DC Max current
